Anti-Static Control Products ANALOG SURFACE RESISTANCE METER KIT

Features

Analog Compliance Verification Surface Resistance Checker

Use to test worksurfaces, shelving, carts, garments, chairs to ANSI/ESD S20.20 per ESD TR53

Automatic Test Range Voltage Selection Per Compliance Verification ESD TR53

Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 105 ohms

Portable Operation with 9 Volt Battery

No charging or sourcing of special batteries needed

LED Illuminates When Battery Power is Low

Prevents operator from making bad measurements

Test Kit Includes Set of Five Pound Electrodes and Leads

Use with the meter to measure resistance point-to-point (RTT) and resistance to ground (RTG)

NIST Calibrated – Original Calibration Certificate can be Downloaded Here

Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.

Made in the United States of America

Made and Stocked in Chino, CA

Specifications

Resistance Ranges 1 x 103

 to 1 x 1013 ohms @

10 Volts, complies with ANSI/

ESD S4.1

1 x 106

 to 1 x 1013 ohms @

100 Volts, complies with ANSI/

ESD S4.1

Accuracy ±1/2 decade

Power Supply 9V alkaline battery

Operating Temperature 41ºF to 85ºF (5ºC to 30ºC)

Environmental

Requirements

Indoor use only at altitudes

less than 6500 ft. (2 km)

Maximum relative humidity of

80% up to 85°F (30°C)

Meter Dimensions 4.5" x 2.8" x 2.1"

(11 cm x 7 cm x 5 cm)

Meter Weight 0.5 lbs (0.2 kg)

Carrying Case Kit

Dimensions

9.5" x 12.0" x 3.5"

(24 cm x 30 cm x 9 cm)

Carrying Case Kit

Weight

12.0 lbs (5.4 kg)

External Electrode 5 lbs (±2 oz), 2.5" in diameter

complies with ANSI/ESD S4.1

Country of Origin United States of America